891.34.2189 DELTA-trans

Nominal size
Differential pressure gauge:
Ø 100mm

Linearity

limit point calibration
1.6 or 2.5

Scale ranges
Differential pressure:
0 ... 0.25 to 0 ... 25 bar
Working pressure: 0 ... 25 bar

• Differential pressure gauge with integrated working
pressure gauge DELTA-plus,
Model 702.01.100 (see data sheet PM 07.15)
• Differential pressure gauge with integrated working
pressure gauge and microswitch DELTA-comb,
Model 702.02.100 (see data sheet PM 07.16)
• Differential pressure gauge with integrated working
pressure gauge and microswitch with component approval
DELTA-comb, Model 702.03.100 (see data sheet PM 07.19)
• Differential pressure switch DELTA-switch,
Model 851.02.100 (see data sheet PM 07.17)

The differential pressure transmitters DELTA-trans are particularly intended for the measurementof very low differential pressures with high demands on one-sided overload.

Standard output signals of 4 . 20 mA (2-wire system) or 0 . 20 mA (3-wire system) can be provided from a nonstabilised DC supply of 10 . 30 V.

Due to the solid and compact design of the instrument, the operation requires almost no maintenance even under arduous industrial service conditions.

As an optional extra, the differential pressure transmitter DELTA-trans (in 2-wire design; 4 ... 20 mA) may be supplied with an integrated 3 ½-digit LCD-display.