- 隔膜压力表带电信号输出 压保护压力计
详细信息
智能型隔膜压力表带电信号输出,不锈钢系列,安全型,过压保护到40,100,400bar,表圆直径 100,160型号:PGT43HP.100/PGT43HP.160华拓电机有限公司
传真:
地址: 北京市朝阳区东直门外大街18楼223室
邮编: 100027应 用For high overpressure 40, 100 or 400 barAcquisition and display of process valuesTransmission of process value to the control room, 4 ... 20 mA; 0 ... 20 mA; 0 ... 10 Vfor high overpressure PN 40, 100 or 400 barSafety-related applications特别功能„Plug and play“ means no configuration necessarySignal transmission in accordance with NamurMeasuring ranges up to 0 ... 16 mbarbig range of special matierialsEasy-to-read, local analogue display needs no powersupply, nominal size 100 and 160
intelliGAUGE PGT43HP.100详 细Nominal size in mm
100, 160
Accuracy class
1.6
Scale ranges
0 ... 16 mbar up to 0 ... 250 mbar (flange Ø 160 mm)
0 ... 400 mbar up to 0 ... 40 bar (flange Ø 100 mm)
or all other equivalent vacuum or combined pressure and vacuum ranges
Wherever the process pressure has to be indicated locally, and, at the same time, signal transmission to a central controller or remote control room is wanted, the PGT43HP intelliGAUGE can be used. Due to the metallic construction of the measuring elements, these instruments have high overload capability in the ranges of 40, 100 and 400 bar.
Through the combination of a high-quality mechanical measuring system and precise electronic signal processing, the process pressure can be read securely, even if the power supply is lost.The PGT43HP intelliGAUGE fulfils all safety-related requirements of the relevant standards and regulations for the on-site display of the operating pressure of pressure vessels. An additional measuring point for the mechanical pressure indication can thus be saved.
The PGT43HP is built upon a high-quality, stainless steel pressure gauge in safety pattern version Model 43x.36 with nominal size of 100 or 160. The pressure gauge is manufactured in accordance with EN 837-3.
The rugged design of diaphragm measuring system produces a pointer rotation proportional to the pressure. An electronic angle encoder, proven in safety-critical automotive applications, determines the position of the pointer shaft – it is a non-contact sensor and therefore completely free from wear and friction. From this, the pressure-proportional, e.g. 4 ... 20 mA electrical output signal is produced.
The electronic WIKA transmitter, integrated into the highquality mechanical pressure gauge, combines the advantages of electrical signal transmission with the advantages of a local mechanical display.
The measuring span (electrical output signal) is set automatically along with the mechanical display, i.e. the scale over the full display range corresponds to 4 ... 20 mA. The electrical zero point can also be set manually.
__________________________________________________________
Accessory: Power supply for top hat railinput
output max. current description 230Vac 24Vdc 70mA A-VA-1 90…
253Vac 24Vdc 500mA KFA6-STR-1.24.500 12…
30Vdc 4.. 20mA Ex signal isolator
Typ SI 815 20…
35Vdc max. 25,4Vdc 0/4.. 20mA Ex- transmitter power supply
KFD2-STC4-Ex1 -